Aroma CountryAroma Country / Blaze Away Support

Support

How To Use Our Diffuser Oils

  • Ultrasonic Diffuser (Mix oil with water) -Use approx. 1/4 - 1/2 fill in your dropper per 75 – 100 mL (2.5 - 3.5 oz.) of water.
  • Nebulizer/Waterless Diffuser (Use straight oil) - Add undiluted oil into the device’s reservoir.
  • Reed Diffuser - Fill your favorite container with oil and let the sticks absorb the scent. Flip sticks over to rejuvenate them.
  • HVAC Scent Systems - Follow individual unit’s directions.
  • Oil Warmer - Put a small amount of oil in the reservoir and turn on lamp for a constant aroma. We recommend not using an open flame as the heat source.
  • Fine Mist Spray Bottle - Simply twist on the sprayer and use to scent any area.

Some fragrances blended with essential oils are more robust than others, therefore, some fragrances may require a little more or less than others.

Please read the instructions below for proper usage:

Because this product is 100% active, oil-based, blended with fine fragrance and made with natural essential oils, it is:

Very slippery on bare floors - When spraying this product over bare, non-carpeted floors, the oil can make the floor slippery. This usually happens when multiple sprays are sprayed in the same area. If this happens, clean up the overspray using a wet mop or cloth. It can also be sprayed in the corners of the room.

Because this product does not contain water and is 100% active, avoid contact with leather, vinyl, wood, plastic, and painted surfaces. It could leave a mark on the surfaces listed. If overspray gets on these surfaces, immediately wipe it off with a wet cloth.

Please note: Various oil scents diffuse at different rates. For best results, start with a small amount of oil and increase gradually to find your optimum strength.